What Can You Create?
Create personalised ceramic tiles, decorative signs, coasters and detailed artwork using your compatible laser engraver.
Key Benefits
-
Deep black marking – Produces detailed, durable images.
-
Easy clean-up – Excess coating washes away with water.
-
Simple application – Water-based and easy to apply with a foam brush.
-
Laser compatible – Works with suitable diode and other compatible laser engravers.
Application Instructions
How to Apply ⌄
Frequently Asked Questions
1. What is Craftcoat Laser Ceramic used for? ⌄
Laser Ceramic is a white, water-based coating that allows compatible laser engravers to produce deep black, durable designs on suitable ceramic tiles.
After engraving, the excess coating can be removed with water, leaving the laser-marked image on the tile.
2. Which ceramic tiles can I use? ⌄
Laser Ceramic is designed for use on suitable ceramic tiles, including compatible glazed tiles.
Results can vary depending on the tile's glaze, surface finish and composition. We recommend testing your chosen tile before starting production.
3. Does Laser Ceramic work with the xTool M2? ⌄
Yes. We've tested Laser Ceramic with the xTool M2 20W diode laser.
Our recommended starting settings are:
- Power: 65%
- Speed: 225 mm/s
- Lines per cm: 100
- Passes: 1
- Air assist: 45%
- Bitmap mode: Grayscale
- Engraving mode: Bidirectional
These settings may need adjusting for different tiles or equipment.
4. Will Laser Ceramic work with other laser engravers? ⌄
Laser Ceramic may work with other compatible laser engravers, including suitable diode laser systems.
The required settings will depend on laser power, wavelength, focus and the ceramic surface.
Always carry out a small test before engraving a finished product.
5. How many coats should I apply? ⌄
One even coat is normally sufficient.
Apply using a clean foam brush, ensuring consistent coverage without pooling or heavy brush marks.
6. Why must I shake the bottle before use? ⌄
Laser Ceramic contains titanium dioxide (TiO₂) white pigment, which can settle during storage.
Shake the bottle thoroughly before every use to ensure the coating is evenly mixed.
7. Does the coating need to be completely dry before engraving? ⌄
Yes. Laser Ceramic must be completely dry before laser processing.
Air drying is possible, but we recommend a suitable temperature-controlled drying oven for consistent results.
As a starting point, approximately 40°C for 10 minutes may be used, provided the coating is completely dry before engraving.
Drying times will vary depending on coating thickness and equipment.
8. Why is air assist important when engraving? ⌄
Air assist helps remove residue from the engraving area during laser processing.
For our xTool M2 20W settings, we recommend 45% air assist, which has helped us achieve cleaner and more consistent marking results.
9. How do I remove the excess coating after engraving? ⌄
Allow the tile to cool after laser processing.
Use water and a soft cloth or sponge to remove the unlasered coating and reveal the finished black image.
There is no need to use alcohol to remove the excess coating.
10. Is the finished laser-marked image durable? ⌄
Laser Ceramic is designed to produce highly durable black markings on suitable ceramic tiles.
The final result depends on the tile, coating application and laser settings.
We recommend testing durability for your intended application, particularly where tiles may be exposed to frequent handling, cleaning or moisture.
11. Can I use Laser Ceramic to make coasters and decorative tiles? ⌄
Yes. Laser Ceramic can be used to create personalised decorative tiles, artwork, signs and ceramic coasters using compatible materials and laser equipment.
For coasters and other functional items, test the finished surface for suitability and durability under the expected conditions of use.